This topic has been archived. It cannot be replied.
-
枫下家园 / 美丽家居 / 求助：家里燃气壁炉坏了能打着火，火苗也不灭，但是只有一个小小的火苗，其他区域不能烧起来，前几天还可以。控制壁炉燃烧的开关在墙上，平时很好用，这几天按开关没反应，把开关换了也不行。就是一点小火苗在那烧，请问可能是啥问题。谢谢
-scls72(laow);
2021-1-18
{200}
(#13461616@0)
-
里面煤气嘴被蜘蛛网灰尘之类的堵上了。要拆开清理。
-averagejoe(小疯小浪);
2021-1-18
(#13461643@0)
-
谢谢目前看好像就这可能了，先打开看看，不行找人修了。谢谢
-scls72(laow);
2021-1-18
{52}
(#13461979@0)
-
请人看看吧
-manniangpai(慢两拍);
2021-1-18
(#13461661@0)
-
是的，100刀呢。
-scls72(laow);
2021-1-18
(#13461980@0)
-
壁炉下面的控制气阀附近的开关动过没有？有一个开关可以控制墙上开关有效或无效的，看看是不是打在错误的位置了。
-dongji(冬季阳光);
2021-1-18
(#13461667@0)
-
应该不是，已经查过了。
-scls72(laow);
2021-1-18
(#13461981@0)
-
I had the same problem. Pilot is on but not strong enough to heat open the thermocouple. some clog in the pilot hole, just use whatever you have to get through it or heat it using lighter. Easy fix. Good luck!
-royrose819(rhly);
2021-1-19
(#13463011@0)
+1
-
ok, will try
-scls72(laow);
2021-1-19
(#13464442@0)
-
I had the same problem. Another possible solution is skip the switch and just connect the wire without the switch to see whether that work. If that works,let it burn for a bit then find a switch that works. Sometimes the electric generator aged and not able to generate enough current for the switch to work.
-jeffrey815(Smartiecat);
2021-1-19
{154}
(#13463021@0)
-
thanks, will try
-scls72(laow);
2021-1-19
(#13464440@0)
-
看着像thermocouple 脏了，空气阀通过它感探火焰温度，如果感应不到高温就会切断供气以免造成危险。找块新的洗碗布把哪儿擦干净就行了。不懂看油管
-rits(Jancci);
2021-1-19
(#13463199@0)
-
thanks
-scls72(laow);
2021-1-19
(#13464438@0)