×

Loading...
Ad by
  • 最优利率和cashback可以申请特批，好信用好收入offer更好。请点链接扫码加微信咨询，Scotiabank -- Nick Zhang 6478812600。
Ad by
  • 最优利率和cashback可以申请特批，好信用好收入offer更好。请点链接扫码加微信咨询，Scotiabank -- Nick Zhang 6478812600。

@San Francisco

其它论坛有人给了我个建议，自己换芯。我过几天trytry。http://www.askmehelpdesk.com/plumbing/remove-shower-cartridge-8338.html

pnpn(双飞雁)
本文发表在 rolia.net 枫下论坛Hi Dennis,

Your in luck. My company installed nothing but Moen valves in their new construction. First turn off the water under the sink, then pry off the metal plate directly on top of the handle. You will find a screw underneath, remove that and pull out and up at the samre time on the handle. Work it around a bit and it should come free. You will see a brass clip holding in the cartridge. Before you pull that clip, PAY VERY CLOSE ATTENTION AS TO HOW THE CARTRIDGE AND THE CLIP ARE POSITIONED IN THE VALVE BODY, yOU ARE GOING TO HAVE TO INSTALL IT THE SAME WAY. Pull the clip and take the white nylon tool that came with the new cartridge and try to break the cartridge free. If you can turn the cartridge pull up on the stem to remove the cartridge. For those'hard to remove cartridges' Moen makes a cartridge puller that can be purchased at your local plumbing supply house. Don't forget to coat the new cartridge with the silicon lube that came with the new cartridge. Never use grease or oil on neoprene "O" rings. Now just put everything back the opposite way you took it apart. I wish I could send drawings over this link but I can't. This is the best I can do. Just follow those directions and you ought to be just fine. Good luck. TOM更多精彩文章及讨论，请光临枫下论坛 rolia.net
(#4597620@0)
Last Updated: 2008-8-4
This post has been archived. It cannot be replied.
Report

Replies, comments and Discussions:

  • 枫下家园 / 美丽家居 / 家里淋浴室的龙头阀门坏了，是one handle旋钮式的，稍微转一个小角度，可以出水，如果再继续转让它出热水，水就停了。 -pnpn(双飞雁); 2008-8-2 {370} (#4594413@0)
    我把龙头的cover打开，看到墙里面的阀门valve是连着上下左右四个管子，而且是和它们焊在一起的。我去homedepot看了一下类似部件，那个valve看起来是没法进一步打开的，如果坏了，可能要整个更换。

    有谁遇到类似的问题？是否就得换那个valve?因为是焊接的，如果要换，我估计得找专业人士来做。。是否还得把墙打开？请问花费大概是多少？有否好的公司或个人推荐？新买的房子，没什么经验，多谢先。
    • 换芯 small job -mewang(robert); 2008-8-2 (#4595127@0)
      • 同问,如和打开,换芯 -all_around(question); 2008-8-3 (#4595433@0)
    • small job 换芯 -mewang(robert); 2008-8-2 (#4595140@0)
      • 如何打开芯呢？ -pnpn(双飞雁); 2008-8-3 (#4595476@0)
        • home depot的人会告诉你，怎么做。 -stephen2008(强者为王的2008); 2008-8-3 (#4596464@0)
    • 牌子是MOEN（见附图）but i'm not the original house owner and might not be warranted. Anyway, I filled out a form on its website regarding my problem. -pnpn(双飞雁); 2008-8-3 {106} (#4595617@0)
      I just hope it's a small inside-part-replacement project rather than a big need-to-open-the-wall project.
      • 小事一桩，到HOME DEPOT买个芯子（cartridge），换上就行了。 -stephen2008(强者为王的2008); 2008-8-3 (#4596458@0)
        • 有同样的问题.今天去HOME DEPOT 问了.结果很令人失望.因为正在HOME DEPOT 销售的产品包括阀体,所以他们猜测要将整个阀体拆下更换. -furydragon(SquareOne); 2008-8-4 {141} (#4596597@0)
          也许不同的HOME DEPOT,员工的水平不一样.临走时,翻了翻他们的书,似乎需要特殊的工具可以将阀芯拆下.这可能就需要咨询厂家了.请楼主一定将解决方案告知.
          • 买阀体换芯 -mewang(robert); 2008-8-4 (#4596620@0)
      • Moen should have life time warrant, but you need to bring the broken part to replace a new one at a retailer, just talk to the sales first. I have replaced a cartridge once and they didn't ask if I am the original owner. -john06(John); 2008-8-4 (#4596644@0)
        • John is right. I did same thing. -synapse(山之西东); 2008-8-4 (#4597612@0)
      • 其它论坛有人给了我个建议，自己换芯。我过几天trytry。http://www.askmehelpdesk.com/plumbing/remove-shower-cartridge-8338.html -pnpn(双飞雁); 2008-8-4 {1257} (#4597620@0)
        本文发表在 rolia.net 枫下论坛Hi Dennis,

        Your in luck. My company installed nothing but Moen valves in their new construction. First turn off the water under the sink, then pry off the metal plate directly on top of the handle. You will find a screw underneath, remove that and pull out and up at the samre time on the handle. Work it around a bit and it should come free. You will see a brass clip holding in the cartridge. Before you pull that clip, PAY VERY CLOSE ATTENTION AS TO HOW THE CARTRIDGE AND THE CLIP ARE POSITIONED IN THE VALVE BODY, yOU ARE GOING TO HAVE TO INSTALL IT THE SAME WAY. Pull the clip and take the white nylon tool that came with the new cartridge and try to break the cartridge free. If you can turn the cartridge pull up on the stem to remove the cartridge. For those'hard to remove cartridges' Moen makes a cartridge puller that can be purchased at your local plumbing supply house. Don't forget to coat the new cartridge with the silicon lube that came with the new cartridge. Never use grease or oil on neoprene "O" rings. Now just put everything back the opposite way you took it apart. I wish I could send drawings over this link but I can't. This is the best I can do. Just follow those directions and you ought to be just fine. Good luck. TOM更多精彩文章及讨论，请光临枫下论坛 rolia.net

More Topics

  • 下水管链接处发现白色粉末，不知道有没有问题？
  • 回答网友问题
  • 这次找人真用上了， @xiaozuiba, 如何设置ecobee供暖只用aux furnace? 我现在在屏幕上端heat，cool，auto，aux只选Aux暂时用着，如果谁变成了heat又自动换成heat pump了，我想选heat时全部走Aux
  • Richmond Hill换车库门选择和价格
  • 简易木制龙门架的制作 -初中物理学课本知识的直接应用
    • 枫下论坛主坛 /  枫下家园 /  美丽家居